EJ22T heads - no hydraulic lash adjusters.
$80 + Shipping (which will be a LOT for anyone east of the Rockies.).
Heads were machined flat, but will need new cam seals and I'd replace the rear o-rings on the water/oil supply for the turbo.
About 180K - from an engine that had been sitting in a garage for a couple of years.
![]()
NEW SAMCO TMIC y-pipe kit- TCS168 (Black) for '02-'05 WRX- includes Vibrant Stainless Steel T-Bolt Clamps. $150 Shipped.
Vibrant- 3 x 2787, 4 x 2794, 2 x 2794 (these are ~$15 each new)
This will also fit the '06-07 WRX TMIC, and will require an extension of the section to connect to turbo. This POSTshows how to make it work.
![]()
Felpro Valve / Rocker Cover Gasket kit for 1.8 '93-'97 and 2.2 NA and Turbo engines '90-'96.
$20 Shipped
NOTE: Felpro can't count - Has ONLY 5 Grommets/gasket/washers.
Part #: VS50395R
![]()
Valve Cover tapped for oil return - Used this for your NA>>>Turbo project.
$25 Shipped or $40 shipped for the pair.
![]()
![]()
$80 + Shipping (which will be a LOT for anyone east of the Rockies.).
Heads were machined flat, but will need new cam seals and I'd replace the rear o-rings on the water/oil supply for the turbo.
About 180K - from an engine that had been sitting in a garage for a couple of years.
NEW SAMCO TMIC y-pipe kit- TCS168 (Black) for '02-'05 WRX- includes Vibrant Stainless Steel T-Bolt Clamps. $150 Shipped.
Vibrant- 3 x 2787, 4 x 2794, 2 x 2794 (these are ~$15 each new)
This will also fit the '06-07 WRX TMIC, and will require an extension of the section to connect to turbo. This POSTshows how to make it work.
Felpro Valve / Rocker Cover Gasket kit for 1.8 '93-'97 and 2.2 NA and Turbo engines '90-'96.
$20 Shipped
NOTE: Felpro can't count - Has ONLY 5 Grommets/gasket/washers.
Part #: VS50395R
Valve Cover tapped for oil return - Used this for your NA>>>Turbo project.
$25 Shipped or $40 shipped for the pair.