Hi guys I am completely stuck here with an issue, was doing my best to figure it out but figured I would post on here to see if anyone has encountered similar issues.
I went to finally test out my harness today and encountered that if I turn the ignition to the on position and then turn it off the power windows and sunroof remain operational along with a very light check engine light and the cluster and brake light. Even if u remove key it still does this. The weird part is if you unplug the negative cable from battery and plug it back in everything stays off as it should until you switch key back to on where the problem continues.
Any help would be appreciated! Also noticed my scan tool lights up with car off when plugged in obd port but shuts off with key on.
Thanks
I went to finally test out my harness today and encountered that if I turn the ignition to the on position and then turn it off the power windows and sunroof remain operational along with a very light check engine light and the cluster and brake light. Even if u remove key it still does this. The weird part is if you unplug the negative cable from battery and plug it back in everything stays off as it should until you switch key back to on where the problem continues.
Any help would be appreciated! Also noticed my scan tool lights up with car off when plugged in obd port but shuts off with key on.
Thanks