1.) Passenger window will roll down, but not back up. pass switch is fine, resulted in a blown spot on driver switch, all other windows work. neither switch will roll it up, but direct connection to the battery and two of the pins gets it back up. I've checked the the wiring harness that goes behind the dash and every single wire tested fine, as did the pass switch. Obviously the motor works, but something isn't making a proper connection and I don't know what else to check.
2.)Other three windows are slow compared to most, have read it could just be the motor being old, an adjuster issue or lack of lubricant. if it's lubrication, what product tends to work well? if the other two, any D.I.Y.'s out there to fix it?
3.) once the issue with the passenger window is resolved would I be able to re-solder the connection on the driver switch or will I just have to replace it?
2.)Other three windows are slow compared to most, have read it could just be the motor being old, an adjuster issue or lack of lubricant. if it's lubrication, what product tends to work well? if the other two, any D.I.Y.'s out there to fix it?
3.) once the issue with the passenger window is resolved would I be able to re-solder the connection on the driver switch or will I just have to replace it?