I recently got a rod knock in my motor and want to get rid of it so i can buy parts to do a GD wrx swap in my car. Here's what I have.
EJ22T short block had 30 psi on cyl 1 and 140 on the other 3 cyl. Rod knock as well. Needs a bore. 350 OBO plus shipping.
EJ20H heads, have run these for 4 years, they're good to just bolt up and go along with intake manifold and after market turbo inlet (under the manifold.) I have enjoyed this setup for 4 years and have been really happy. 400 firm without injectors. 450 with injectors.
This whole setup has seen 18 psi and 14 psi and stock boos during the 4 year run. The heads probably have 80kmk on them and the block has about 160k miles on it.
Selling because I want to do an ej255 swap on my 92.
prices are fairly firm, but money talks.
Local sale is priority.
on to the pictures...
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Heads, as you can see, I have kept everything in good order...
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
EJ22T short block had 30 psi on cyl 1 and 140 on the other 3 cyl. Rod knock as well. Needs a bore. 350 OBO plus shipping.
EJ20H heads, have run these for 4 years, they're good to just bolt up and go along with intake manifold and after market turbo inlet (under the manifold.) I have enjoyed this setup for 4 years and have been really happy. 400 firm without injectors. 450 with injectors.
This whole setup has seen 18 psi and 14 psi and stock boos during the 4 year run. The heads probably have 80kmk on them and the block has about 160k miles on it.
Selling because I want to do an ej255 swap on my 92.
prices are fairly firm, but money talks.
Local sale is priority.
on to the pictures...
Heads, as you can see, I have kept everything in good order...
