I just finished my ej20G swap.
I connected all the lines, checked all connections, and grounds and everything seems in order. Swap was running before pulled. I re-did the heads and put in new head gaskets and valve cover gaskets. Checked and made sure the timing belt was set 100% correct before putting everything back together.
Car is cranking but won't start up. Checked fuel, and fuel is good and pressure is good. Checked spark on the ignition coil and no spark coming out. Harness seems good, everything works in the car, doesn't seem like a short. I did have the ignition coils out in the open air for quite some time, I have no idea if that has any effect on that...
If someone could chime in with some help, I could really use it right now...
-Andrew
I connected all the lines, checked all connections, and grounds and everything seems in order. Swap was running before pulled. I re-did the heads and put in new head gaskets and valve cover gaskets. Checked and made sure the timing belt was set 100% correct before putting everything back together.
Car is cranking but won't start up. Checked fuel, and fuel is good and pressure is good. Checked spark on the ignition coil and no spark coming out. Harness seems good, everything works in the car, doesn't seem like a short. I did have the ignition coils out in the open air for quite some time, I have no idea if that has any effect on that...
If someone could chime in with some help, I could really use it right now...
-Andrew